Control systems
Caladair control systems enable the management and optimization of ventilation and air handling installations. With an intuitive interface and modular options, they ensure optimal comfort, maximum energy efficiency, and simplified maintenance.
Need help
You are looking after an information ?
Post your request or ask your question
CALADAIR is at your service
SYSTEMS TOP&DIVA™, air flow modulation zone
Kit for zoning, air flow rate modulation solution for all buliding applications
This PLUG & PLAY application is ErP compliant.
According to the ventilation system, two kit solutions are available :
- SYSTEM TOP™ which applies a 2-flow rate ventilation system
- SYSTEM DIVA™ which uses proportional ventilation
KIT MONOZONE™, air flow rate modulation kit limits loss of heat and guarantees air renewal suited to the building actual occupancy needs.
As a basic principle, the minimum flow rate corresponding to the room non-occupancy flow rate is around 20% of the nominal flow rate for a
MONOZONE™ type building management
Two solutions are available :
SYSTEM TOP™, 2 air flow rates ventilation, associated with the actual occupancy control of the room, detected either by a presence sensor or a CO2 probe, or a combination of both, the SYSTEM TOP™ solution provides, depending on the type of premises, gains of 35% in case of the "All or little" air renewal management system.
SYSTEM DIVA™, proportional ventilation, enables, with its proportional ventilation mode, gains of 65%.
Besides the obvious energy savings, both systems also bring improvements in air quality and acoustic comfort.
True PLUG & PLAY products, they are built with a IP65 Perspex box equipped with cable glands with knock-outs, a configured regulator (SYSTEM DIVA™ only), a 230-24V AC (40VA) transformer enough sized to power the system components and connections of components (probes, etc.) of the system.
As a basic principle, the minimum flow rate corresponding to the room non-occupancy flow rate is around 20% of the nominal flow rate for a
MONOZONE™ type building management
Two solutions are available :
SYSTEM TOP™, 2 air flow rates ventilation, associated with the actual occupancy control of the room, detected either by a presence sensor or a CO2 probe, or a combination of both, the SYSTEM TOP™ solution provides, depending on the type of premises, gains of 35% in case of the "All or little" air renewal management system.
SYSTEM DIVA™, proportional ventilation, enables, with its proportional ventilation mode, gains of 65%.
Besides the obvious energy savings, both systems also bring improvements in air quality and acoustic comfort.
True PLUG & PLAY products, they are built with a IP65 Perspex box equipped with cable glands with knock-outs, a configured regulator (SYSTEM DIVA™ only), a 230-24V AC (40VA) transformer enough sized to power the system components and connections of components (probes, etc.) of the system.
Solution in compliance with ErP2018 for office applications
PLUG&PLAY, SYSTEM TOP™ and SYSTEM DIVA™ boxes are wired, configured and tested at our factory
SALES DOCUMENTATION
VARIOUS CERTIFICATES
